7. SPECIFICATIONS
AUDIO INPUT |
|
Connectors | XLR and 1/4" jack |
Type | RF filtered, servo balanced input |
Impedance | 50 kOhms balanced, 25 kOhm unbalanced |
Max. Input Level | +21 dBu balanced and unbalanced (unity gain) |
CMRR | typ. 40 dB, >55 dB @ 1 kHz |
AUDIO OUTPUT |
|
Connectors | XLR and 1/4" jack |
Type | Electronically |
| balanced). Automatic level correction for unbalanced use (6 dB). |
Impedance | 60 Ohms balanced, 30 Ohm unbalanced |
Max. Output Level | +21 dBu, +20 dBm balanced and unbalanced |
SYSTEM SPECIFICATIONS |
|
Bandwidth | 20 Hz to 20 kHz, |
Frequency Response | 0.35 Hz to 200 kHz, |
Noise | |
THD | 0.008 % typ. @ +4 dBu, 1 kHz, Gain 1 |
| 0.04 % typ. @ +20 dBu, 1 kHz, Gain 1 |
IMD | 0.01 % typ. SMPTE |
Crosstalk | |
BASS PROCESSOR |
|
Type | “Dual Mode” Bass Processor |
Low Mix | variable (0 to 6) |
MULTIBAND PROCESSOR |
|
Type | “Natural Sonic” processor with VSP (Variable Sound Processing) |
NR Sensitivity | variable (0 to 6) |
Tune | variable (1 to 8 kHz) |
Process | variable (Enhancer to Exciter) |
High Mix | variable (0 to 6) |
SURROUND SECTION |
|
Surround | variable (0 to 6) |
FUNCTION SWITCHES AND CONTROLS | |
Shift | Switches the frequency of the Bass Processor between “Low” and |
| |
Mode | Switches the bass sound from “Soft” to “Tight” |
Auto NR | Activates the noise reduction system |
In/Out | Activates the relay controlled |
Solo | Monitors the pure effect signal (Solo function) |
Surround | Activates the surround processor |
INDICATORS |
|
Effect | 13 LED meter indicates the effect |
Function switch | LED indiactor for each function switch |
22 | 7. SPECIFICATIONS |
