13
The SURROUND control determines the effect of the surround processor. This function serves to im- prove the intensity of the stereo effect and to enlarge the stereo basis dependent on the program content. Therefore, this function can only be used in conjunction with stereo program material.
4.4 Rear Panel Control Elements Of The ULTRAFEX PRO
15
14
16
18 |
| 17 |
Fig. 4.5: Control elements of the rear panel
14
15
16
17
18
SERIAL NUMBER. Please take the time to have the warranty card filled out completely by your spe- cialized dealer, and return it within 14 days after the date of purchase, so as to be entitled to benefit from our extended warranty.
FUSE HOLDER / VOLTAGE SELECTOR. Please make sure that your local voltage matches the voltage indicated on the unit, before you attempt to connect and operate the ULTRAFEX PRO. Blown fuses may only be replaced by fuses of the same type and rating.
MAINS CONNECTION. Use the enclosed power cord to connect the unit to the mains. Please also note the instructions given in the “INSTALLATION“ chapter.
AUDIO IN. These are the audio inputs of your ULTRAFEX PRO, available both as balanced 6.3 mm jack and XLR connectors.
AUDIO OUT. These are the audio outputs of your ULTRAFEX PRO. Matching phone jack and XLR connectors are wired in parallel. These outputs can be
14 | 4. CONTROLS |
