Managing Network Adapters

Modifying vHBA Properties

 

Command or Action

Purpose

Step 23

Server /chassis/adapter/host-fc-if # scope

Enters the interrupt command mode.

 

interrupt

 

Step 24

Server

 

/chassis/adapter/host-fc-if/interrupt # set

 

interrupt-mode {intx msi msix}

Step 25

Server

 

/chassis/adapter/host-fc-if/interrupt # exit

Step 26

Server /chassis/adapter/host-fc-if # scope

 

port

Specifies the Fibre Channel interrupt mode. The modes are as follows:

intx Line-based interrupt (INTx)

msi Message-Signaled Interrupt (MSI)

msix Message Signaled Interrupts with the optional extension (MSIx). This is the recommended and default option.

Exits to the host Fibre Channel interface command mode.

Enters the Fibre Channel port command mode.

Step 27

Server /chassis/adapter/host-fc-if/port #

Specifies the I/O throttle count, the number of I/O

 

set outstanding-io-count count

operations that can be pending in the vHBA at one

 

 

time. The range is 1 to 1024; the default is 512

 

 

operations.

Step 28

Server /chassis/adapter/host-fc-if/port #

Specifies the maximum logical unit numbers (LUNs)

 

set max-target-luns count

per target, the maximum number of LUNs that the

 

 

driver will discover. This is usually an operating

 

 

system platform limitation. The range is 1 to 1024;

 

 

the default is 256 LUNs.

Step 29

Server /chassis/adapter/host-fc-if/port #

Exits to the host Fibre Channel interface command

 

exit

mode.

Step 30

Server /chassis/adapter/host-fc-if # scope

Enters the Fibre Channel fabric login command mode.

 

port-f-logi

 

Step 31

Server

 

/chassis/adapter/host-fc-if/port-f-logi #

 

set flogi-retries {infinite count}

Specifies the fabric login (FLOGI) retries value, the number of times that the system tries to log in to the fabric after the first failure. Enter a number between 0 and 4294967295 or enter infinite ; the default is infinite retries.

Step 32

Server

 

/chassis/adapter/host-fc-if/port-f-logi #

 

set flogi-timeout msec

Step 33

Server

 

/chassis/adapter/host-fc-if/port-f-logi #

 

exit

Specifies the fabric login (FLOGI) timeout value, the number of milliseconds that the system waits before it tries to log in again. The range is 1 to 255000; the default is 2000 milliseconds.

Exits to the host Fibre Channel interface command mode.

 

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

90

OL-28893-01

Page 106
Image 106
Cisco Systems UCSCPCIEBTG manual Enters the interrupt command mode, Interrupt-mode intx msi msix, Exit, Port-f-logi