Managing the Server

Shutting Down the Server

Procedure

 

Command or Action

Purpose

Step 1

Server# scope chassis

Enters chassis command mode.

Step 2

Server /chassis # power hard-reset

After a prompt to confirm, resets the server.

This example resets the server:

Server# scope chassis

Server /chassis # power hard-reset

This operation will change the server's power state.

Continue?[yN]

Shutting Down the Server

Important If any firmware or BIOS updates are in progress, do not shut down the server until those tasks are complete.

Before You Begin

You must log in with user or admin privileges to perform this task.

Procedure

 

Command or Action

Purpose

Step 1

Server# scope chassis

Enters chassis mode.

Step 2

Server /chassis # power shutdown

Shuts down the server.

The following example shuts down the server:

Server# scope chassis

Server /chassis # power shutdown

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

OL-28893-01

17

Page 33
Image 33
Cisco Systems 57712, UCSCPCIEBTG manual Shutting Down the Server, Server# scope chassis Enters chassis mode