Cisco Systems 57712, UCSCPCIEBTG VM FEX Settings, General Properties Settings Name Description

Managing Network Adapters

VM FEX Settings

This example displays the VM FEX properties:

Server /chassis/adapter # show vmfex detail

Name pts0:

MTU: 1500

Uplink Port: 0

MAC Address: 00:00:00:00:00:00

CoS: N/A

Trust Host CoS:

PCI Order:

VLAN: N/A

VLAN Mode: N/A

Rate Limiting:

PXE Boot: disabled

Channel Number: 0

Port Profile:

Uplink Failover: Enabled

Uplink Failback Timeout: 5

Server /chassis/adapter # scope				vmfex pts0
Server /chassis/adapter/vmfex #				show	interrupt
Interrupt Count Coalescing Time				(us)	Coalescing Type Interrupt Mode
---------------	--------------------				--------------- ---------------
6	125				MIN	MSI
Server /chassis/adapter/vmfex #				show	recv-queue
Receive Queue Count Receive Queue Ring Size
-------------------		------------------------------
4		512
Server /chassis/adapter/vmfex #				show	trans-queue
Transmit Queue Count Transmit Queue Ring Size
--------------------		-------------------------------
1		256
Server /chassis/adapter/vmfex #				show	comp-queue
Completion Queue Count			Completion		Queue Ring Size
------------------------- --------------------------
5			1
Server /chassis/adapter/vmfex #				show	offload	Large Receive
TCP Segment Offload		TCP Rx Checksum			TCP Tx Checksum

-------------------- ---------------- ---------------- -------------

enabled	enabled	enabled	enabled
Server	/chassis/adapter/vmfex # show rss
TCP Rx	Side Scaling
--------------------
enabled
Server	/chassis/adapter/vmfex #

VM FEX Settings

The following tables describe the VM FEX settings that you can view.

General Properties Settings
Name	Description
Name	A user-defined name for the VM FEX.
MTU	The maximum transmission unit, or packet size, that this VM FEX
	accepts.

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

OL-28893-01 111