Cisco Systems 57712, UCSCPCIEBTG manual Deleting a Boot Table Entry, Create-boot-entry wwpn lun-id

Managing Network Adapters

Deleting a Boot Table Entry

Procedure

	Command or Action	Purpose
Step 1	Server# scope chassis	Enters the chassis command mode.
Step 2	Server /chassis # scope adapter	Enters the command mode for the adapter card at the PCI
	index	slot number specified by index.
		Note	The server must be powered on before you can
			view or change adapter settings.

Step 3	Server /chassis/adapter # scope
	host-fc-if {fc0 fc1 name}
Step 4	Server /chassis/adapter/host-fc-if #
	create-boot-entry wwpn lun-id

Step 5	Server /chassis/adapter/host-fc-if #
	commit

Enters the host Fibre Channel interface command mode for the specified vHBA.

Creates a boot table entry.

•wwpn — The World Wide Port Name (WWPN) for the boot target in the form hh:hh:hh:hh:hh:hh:hh:hh.

•lun-id—The LUN ID of the boot LUN. The range is 0 to 255.

Commits the transaction to the system configuration.

Note The changes will take effect upon the next server reboot.

This example creates a boot table entry for vHBA fc1:

Server# scope chassis

Server /chassis # scope adapter 1

Server /chassis/adapter # scope host-fc-if fc1

Server /chassis/adapter/host-fc-if # create-boot-entry 20:00:00:11:22:33:44:55 3

Server /chassis/adapter/host-fc-if *# commit

New boot table entry will take effect upon the next server reset

Server /chassis/adapter/host-fc-if #

Deleting a Boot Table Entry

Procedure

	Command or Action	Purpose
Step 1	Server# scope chassis	Enters the chassis command mode.
Step 2	Server /chassis # scope adapter	Enters the command mode for the adapter card at the PCI
	index	slot number specified by index.
		Note	The server must be powered on before you can
			view or change adapter settings.

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

OL-28893-01 95