Making a Global Hot Spare

Server /chassis/storageadapter # scope physical-drive 3

Server /chassis/storageadapter/physical-drive # make-dedicated-hot-spare

5:VD_OS_1, RAID 0, 102400 MB, physical disks: 1

6:VD_OS_2, RAID 0, 12288 MB, physical disks: 1

7:VD_OS_3, RAID 0, 12288 MB, physical disks: 1

8:VD_DATA_1, RAID 0, 12512 MB, physical disks: 1

9:RAID1_2358, RAID 1, 40000 MB, physical disks: 2,3,5,8

11:JFB_RAID1_67, RAID 1, 20000 MB, physical disks: 6,7

12:JFB_Crv_R1_40, RAID 1, 40000 MB, physical disks: 6,7

13:JFB_R1_10GB, RAID 1, 10000 MB, physical disks: 6,7

Please choose from the above 8 virtual drives-->6

Server /chassis/storageadapter/physical-drive #

	Command or Action	Purpose
Step 1	Server# scope chassis	Enters the chassis command mode.
Step 2	Server /chassis # scope storageadapter slot	Enters command mode for an installed
		storage card.
Step 3	Server /chassis/storageadapter # scope	Enters command mode for the specified
	physical-drive drive-number	physical drive.
Step 4	Server /chassis/storageadapter/physical-drive #
	make-global-hot-spare
Step 5	Server /chassis/storageadapter/physical-drive #	Displays the status of the task that is in
	get-operation-status	progress on the drive.

This example shows how to make physical drive 3 a global hot spare:

Server# scope chassis

Server /chassis # scope storageadapter SLOT-3

Server /chassis/storageadapter # scope physical-drive 3

Server /chassis/storageadapter/physical-drive # make-global-hot-spare

Server /chassis/storageadapter/physical-drive #

Preparing a Drive for Removal

You can confirm this task only on physical drives that display the Unconfigured Good status.

	Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
122	OL-28893-01