Cisco Systems UCSCPCIEBTG Viewing the Flexible Flash Controller Properties, Flash controllers

Viewing Server Properties

Viewing the Flexible Flash Controller Properties

Product ID	Battery Status	Cache Memory Size
---- --------------	--------------	--------------
LSI Logic	fully charged	0 MB

Server /chassis #

This example displays battery backup unit information for the storage card named SAS:

Server# scope chassis		storageadapter SAS
Server /chassis # scope
Server /chassis/storageadapter # show bbu				Current	Charge Charging State
Controller Battery Type		Battery Present	Voltage
---------- ------------		---------------	----------	----------	------ --------------
SAS	iBBU	true	4.051 V	0.000 A	100% fully charged

Server /chassis/storageadapter #

Viewing the Flexible Flash Controller Properties

Before You Begin

•Cisco Flexible Flash must be supported by your platform.

Procedure

	Command or Action	Purpose
Step 1	Server# scope chassis	Enters the chassis command mode.
Step 2	Server /chassis # show flexflash [detail]	(Optional) Displays the available Cisco Flexible
		Flash controllers.
Step 3	Server /chassis # scope flexflash index	Enters the Cisco Flexible Flash controller command
		mode for the specified controller. At this time, the
		only permissible index value is FlexFlash-0.
Step 4	Server /chassis/flexflash # show	Displays the operational profile properties.
	operational-profile [detail]

This example displays the properties of the flash controller:

Server# scope chassis
Server /chassis # show flexflash			Firmware Version	Vendor	Internal State
Controller	Product Name	Has Error
------------	----------------	----------	-----------------	--------	---------------
FlexFlash-0	Cisco FlexFlash	No	1.2 build 247	Cypress	Connected

Server /chassis # scope flexflash FlexFlash-0

Server /chassis # show operational-profile		Host Accessible VDs
Primary Member Slot	I/O Error Threshold
--------------------	--------------------	--------------------
slot1	100	SCU Drivers

Server /chassis/flexflash #

	Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
42	OL-28893-01