Cisco Systems 57712 Viewing Network Adapter Properties, Configuring Network Adapter Properties

Managing Network Adapters

Viewing Network Adapter Properties

Viewing Network Adapter Properties

Procedure

	Command or Action	Purpose
Step 1	Server# scope chassis	Enters the chassis command mode.
Step 2	Server /chassis # show adapter	Displays adapter properties. To display the properties
	[index] [detail]	of a single adapter, specify the PCI slot number as the
		index argument.

This example displays the properties of adapter 2:

Server# scope chassis
Server	/chassis # show adapter		Product ID	Vendor
PCI Slot Product Name		Serial Number
-------- --------------		--------------	-------------- --------------------
1	UCS VIC 1225	FCH1613796C	UCSC-PCIE-C... Cisco Systems Inc
Server	/chassis # show adapter 2 detail
PCI Slot 2:
Product Name: UCS VIC 1225
Serial Number: FCH1613796C
Product ID: UCSC-PCIE-CSC-02
Adapter Hardware Revision: 4
Current FW Version: 2.1(0.291)
NIV: Disabled
FIP: Enabled
Configuration Pending: no
CIMC Management Enabled : no
VID: V00
Vendor: Cisco Systems Inc
Description:
Bootloader Version: 2.1(0.291)
FW	Image 1 Version: 2.1(0.291)
FW	Image 1 State: RUNNING ACTIVATED
FW	Image 2 Version: 1.6(0.547)
FW	Image 2 State: BACKUP INACTIVATED
FW	Update Status: Idle
FW	Update Error: No error
FW	Update Stage: No operation (0%)
FW	Update Overall Progress: 0%
Server	/chassis #

Configuring Network Adapter Properties

Before You Begin

•You must log in with admin privileges to perform this task.

•A supported Virtual Interface Card (VIC) must be installed in the chassis and the server must be powered on.

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

OL-28893-01 85