Cisco Systems UCSCPCIEBTG Managing Server Power, Powering On the Server, Powering Off the Server

Managing the Server

Managing Server Power

Managing Server Power

Powering On the Server

Note If the server was powered off other than through the CIMC, the server will not become active immediately when powered on. In this case, the server will enter standby mode until the CIMC completes initialization.

Important If any firmware or BIOS updates are in progress, do not change the server power until those tasks are complete.

Before You Begin

You must log in with user or admin privileges to perform this task.

Procedure

	Command or Action	Purpose
Step 1	Server# scope chassis	Enters chassis command mode.
Step 2	Server /chassis # power on	Turns on the server.

This example turns on the server:

Server# scope chassis

Server /chassis # power on

This operation will		change the server's power state.
Continue?[yN]y
Server /chassis # show			UUID
Power Serial Number		Product Name
----- -------------		-------------	------------------------------------
on	Not Specified	Not Specified	208F0100020F000000BEA80000DEAD00

Powering Off the Server

Important If any firmware or BIOS updates are in progress, do not power off the server until those tasks are complete.

Before You Begin

You must log in with user or admin privileges to perform this task.

	Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
18	OL-28893-01