Cisco Systems UCSCPCIEBTG, 57712 manual Configuring Power Policies, Viewing the Power Statistics

Managing the Server

Configuring Power Policies

Configuring Power Policies

Viewing the Power Statistics

Procedure

	Command or Action	Purpose
Step 1	Server# show power-cap [detail]	Displays the server power consumption statistics
		and the power cap policy.

The displayed fields are described in the following table:

Name	Description
Current Consumption	The power currently being used by the server, in watts.
Maximum Consumption	The maximum number of watts consumed by the server since the last
	time it was rebooted.
Minimum Consumption	The minimum number of watts consumed by the server since the last
	time it was rebooted.
Minimum Configurable Limit	The minimum amount of power that can be specified as the peak power
	cap for this server, in watts.
Maximum Configurable Limit	The maximum amount of power that can be specified as the peak power
	cap for this server, in watts.

Additional fields are described in the following table:

Name	Description
Enable Power Capping	, the system monitors how much power is allocated to the server and
	takes the specified action if the server goes over its maximum allotment.
Peak Power	The maximum number of watts that can be allocated to this server. If
	the server requests more power than specified in this field, the system
	takes the action defined in the Non-Compliance Action field.
	Enter a number of watts within the range defined by the Minimum
	Configurable Limit field and the Maximum Configurable Limit
	field.

	Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
20	OL-28893-01