Cisco Systems 57712, UCSCPCIEBTG manual Power Cycling the Server, Command or Action Purpose

Managing the Server

Power Cycling the Server

Procedure

	Command or Action	Purpose
Step 1	Server# scope chassis	Enters chassis command mode.
Step 2	Server /chassis # power off	Turns off the server.
This example turns off the server:
Server# scope chassis
Server /chassis # power off
This operation will change the server's power state.
Continue?[yN]y
Server /chassis # show
Power Serial Number Product Name UUID
-----	------------- ------------- ------------------------------------
off	Not Specified Not Specified 208F0100020F000000BEA80000DEAD00

Power Cycling the Server

Important If any firmware or BIOS updates are in progress, do not power cycle the server until those tasks are complete.

Before You Begin

You must log in with user or admin privileges to perform this task.

Procedure

	Command or Action	Purpose
Step 1	Server# scope chassis	Enters chassis command mode.
Step 2	Server /chassis # power cycle	Power cycles the server.

This example power cycles the server:

Server# scope chassis

Server /chassis # power cycle

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

OL-28893-01 19