Cisco Systems UCSCPCIEBTG, 57712 manual Set as Boot Drive, Modifying Attributes of a Virtual Drive

Managing Network Adapters

Set as Boot Drive

Set as Boot Drive

Before You Begin

You must log in with admin privileges to perform this task.

Procedure

	Command or Action	Purpose
Step 1	Server# scope chassis	Enters the chassis command mode.
Step 2	Server /chassis # scope storageadapter slot	Enters command mode for an installed storage
		card.
Step 3	Server /chassis/storageadapter # scope	Enters command mode for the specified virtual
	virtual-drive drive-number	drive.
Step 4	Server /chassis/storageadapter #	Specifies the controller to boot from this
	set-boot-drive	virtual drive.

This example shows how to specify the controller to boot from virtual drive 3:

Server# scope chassis

Server /chassis # scope storageadapter SLOT-3

Server /chassis/storageadapter # scope virtual-drive 3

Server /chassis/storageadapter/virtual-drive	#	set-boot-drive
Are you sure you want to set virtual drive 3	as the boot drive?
Enter 'yes' to confirm -> yes	#
Server /chassis/storageadapter/virtual-drive

Modifying Attributes of a Virtual Drive

Before You Begin

You must log in with admin privileges to perform this task.

Procedure

	Command or Action	Purpose
Step 1	Server# scope chassis	Enters the chassis command mode.
Step 2	Server /chassis # scope storageadapter slot	Enters command mode for an installed
		storage card.
Step 3	Server /chassis/storageadapter # scope	Enters the command mode for the virtual
	virtual-drive 3	drive.

	Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
120	OL-28893-01