Cisco Systems UCSCPCIEBTG manual Rebuilding Persistent Binding, Set persistent-lun-binding disable

Managing Network Adapters

Rebuilding Persistent Binding

	Command or Action	Purpose
Step 3	Server /chassis/adapter # scope host-fc-if	Enters the host Fibre Channel interface command
	{fc0 fc1 name}	mode for the specified vHBA.
Step 4	Server /chassis/adapter/host-fc-if # scope	Enters the persistent binding command mode for
	perbi	the vHBA.
Step 5	Server /chassis/adapter/host-fc-if/perbi #	Disables persistent binding for the vHBA.
	set persistent-lun-binding disable
Step 6	Server /chassis/adapter/host-fc-if/perbi #	Commits the transaction to the system
	commit	configuration.

This example disables persistent binding for a vHBA:

Server# scope chassis

Server /chassis # scope adapter 4

Server /chassis/adapter # scope host-fc-if fc1

Server /chassis/adapter/host-fc-if # scope perbi

Server /chassis/adapter/host-fc-if/perbi # set persistent-lun-binding disable

Server /chassis/adapter/host-fc-if/perbi *# commit

Server /chassis/adapter/host-fc-if/perbi #

Rebuilding Persistent Binding

Before You Begin

Persistent binding must be enabled in the vHBA properties.

Procedure

	Command or Action	Purpose
Step 1	Server# scope chassis	Enters the chassis command mode.
Step 2	Server /chassis # scope adapter index	Enters the command mode for the adapter card at the
		PCI slot number specified by index.
		Note	The server must be powered on before you
			can view or change adapter settings.
Step 3	Server /chassis/adapter # scope	Enters the host Fibre Channel interface command
	host-fc-if {fc0 fc1 name}	mode for the specified vHBA.
Step 4	Server /chassis/adapter/host-fc-if #	Enters the persistent binding command mode for the
	scope perbi	vHBA.
Step 5	Server /chassis/adapter/host-fc-if/perbi	Rebuilds the persistent binding table for the vHBA.
	# rebuild

	Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
98	OL-28893-01