Cisco Systems 57712, UCSCPCIEBTG Enabling Persistent Binding, Disabling Persistent Binding, Perbi

Managing Network Adapters

Enabling Persistent Binding

Enabling Persistent Binding

Procedure

	Command or Action	Purpose
Step 1	Server# scope chassis	Enters the chassis command mode.
Step 2	Server /chassis # scope adapter index	Enters the command mode for the adapter card at
		the PCI slot number specified by index.
		Note	The server must be powered on before you
			can view or change adapter settings.
Step 3	Server /chassis/adapter # scope host-fc-if	Enters the host Fibre Channel interface command
	{fc0 fc1 name}	mode for the specified vHBA.
Step 4	Server /chassis/adapter/host-fc-if # scope	Enters the persistent binding command mode for
	perbi	the vHBA.
Step 5	Server /chassis/adapter/host-fc-if/perbi #	Enables persistent binding for the vHBA.
	set persistent-lun-binding enable
Step 6	Server /chassis/adapter/host-fc-if/perbi #	Commits the transaction to the system
	commit	configuration.

This example enables persistent binding for a vHBA:

Server# scope chassis

Server /chassis # scope adapter 4

Server /chassis/adapter # scope host-fc-if fc1

Server /chassis/adapter/host-fc-if # scope perbi

Server /chassis/adapter/host-fc-if/perbi # set persistent-lun-binding enable

Server /chassis/adapter/host-fc-if/perbi *# commit

Server /chassis/adapter/host-fc-if/perbi #

Disabling Persistent Binding

Procedure

	Command or Action	Purpose
Step 1	Server# scope chassis	Enters the chassis command mode.
Step 2	Server /chassis # scope adapter index	Enters the command mode for the adapter card at
		the PCI slot number specified by index.
		Note	The server must be powered on before you
			can view or change adapter settings.

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

OL-28893-01 97