Cisco Systems 57712 manual Enters the Fibre Channel port login command mode, Port-p-logi, Server

Managing Network Adapters

Modifying vHBA Properties

	Command or Action	Purpose
Step 34	Server /chassis/adapter/host-fc-if # scope	Enters the Fibre Channel port login command mode.
	port-p-logi

Step 35	Server
	/chassis/adapter/host-fc-if/port-p-logi #
	set plogi-retries count

Specifies the port login (PLOGI) retries value, the number of times that the system tries to log in to the fabric after the first failure. The range is 0 and 255; the default is 8 retries.

Step 36	Server
	/chassis/adapter/host-fc-if/port-p-logi #
	set plogi-timeout msec

Specifies the port login (PLOGI) timeout value, the number of milliseconds that the system waits before it tries to log in again. The range is 1 to 255000; the default is 2000 milliseconds.

Step 37	Server	Exits to the host Fibre Channel interface command
	/chassis/adapter/host-fc-if/port-p-logi #	mode.
	exit
Step 38	Server /chassis/adapter/host-fc-if # scope	Enters the SCSI I/O command mode.
	scsi-io
Step 39	Server /chassis/adapter/host-fc-if/scsi-io	The number of command descriptor block (CDB)
	# set cdb-wq-count count	transmit queue resources to allocate. The range is 1
		to 8; the default is 1.
Step 40	Server /chassis/adapter/host-fc-if/scsi-io	The number of descriptors in the command descriptor
	# set cdb-wq-ring-size size	block (CDB) transmit queue. The range is 64 to 512;
		the default is 512.

Step 41	Server /chassis/adapter/host-fc-if/scsi-io
	# exit
Step 42	Server /chassis/adapter/host-fc-if # scope
	trans-queue
Step 43	Server
	/chassis/adapter/host-fc-if/trans-queue #
	set fc-wq-ring-size size

Exits to the host Fibre Channel interface command mode.

Enters the Fibre Channel transmit queue command mode.

The number of descriptors in the Fibre Channel transmit queue. The range is 64 to 128; the default is 64.

Step 44	Server	Exits to the host Fibre Channel interface command
	/chassis/adapter/host-fc-if/trans-queue #	mode.
	exit

Step 45	Server /chassis/adapter/host-fc-if # scope
	recv-queue
Step 46	Server
	/chassis/adapter/host-fc-if/recv-queue #
	set fc-rq-ring-size size

Enters the Fibre Channel receive queue command mode.

The number of descriptors in the Fibre Channel receive queue. The range is 64 to 128; the default is 64.

Step 47	Server	Exits to the host Fibre Channel interface command
	/chassis/adapter/host-fc-if/recv-queue #	mode.
	exit

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

OL-28893-01 91