Cisco Systems 57712, UCSCPCIEBTG manual Critical, Error Informational Debug, Server-ip ip-address

Viewing Logs

Sending the CIMC Log to a Remote Server

Command or Action	Purpose
	• critical

• error

• warning

• notice

• informational

• debug

Note CIMC does not remotely log any messages with a severity below the selected severity. For example, if you select error, then the remote syslog server will receive all CIMC log messages with the severity Emergency, Alert, Critical, or Error. It will not show Warning, Notice, Informational, or Debug messages.

Step 4	Server /cimc/log # scope server	Selects one of the two remote syslog server profiles and
	{1 2}	enters the command mode for configuring the profile.
Step 5	Server /cimc/log/server # set	Specifies the remote syslog server IP address.
	server-ip ip-address
Step 6	Server /cimc/log/server # set	Enables the sending of CIMC log entries to this syslog
	enabled {yes no}	server.
Step 7	Server /cimc/log/server # commit	Commits the transaction to the system configuration.

This example shows how to configure a remote syslog server profile and enable the sending of CIMC log entries with a minimum severity level of Warning:

Server# scope cimc
Server /cimc # scope log
Server /cimc/log	# set remote-syslog-severity warning
Server /cimc/log	*# scope server 2
Server /cimc/log/server		*# set server-ip 192.0.2.34
Server /cimc/log/server		*# set enabled yes
Server /cimc/log/server		*# commit
Server /cimc/log/server		# exit
Server /cimc/log	# show	server	Enabled
Syslog Server	IP Address
----------------	---------------- --------
1	0.0.0.0		no
2	192.0.2.34		yes

Server /cimc/log # show remote-syslog-severity

Remote Syslog Severity: warning

Server /cimc/log #

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

OL-28893-01 169