Cisco Systems 57712 manual Configuring the Virtual KVM, Set encrypted yes, Set local-video yes

Managing Remote Presence

Configuring the Virtual KVM

	Command or Action			Purpose
Step 3	Server /kvm #	commit		Commits the transaction to the system configuration.
Step 4	Server /kvm #	show [detail]		(Optional) Displays the virtual KVM configuration.
This example disables the virtual KVM:
Server# scope kvm
Server /kvm # set enabled no
Server /kvm *# commit
Server /kvm # show			Active Sessions Enabled KVM Port
Encryption Enabled Local Video
------------------ ---------------- --------------- ------- --------
no	yes		0	no	2068

Server /kvm #

Configuring the Virtual KVM

Before You Begin

You must log in as a user with admin privileges to configure the virtual KVM.

Procedure

	Command or Action		Purpose
Step 1	Server# scope kvm		Enters KVM command mode.
Step 2	Server /kvm # set enabled {yes no}		Enables or disables the virtual KVM.
Step 3	Server /kvm #	set encrypted {yes	If encryption is enabled, the server encrypts all video
	no}		information sent through the KVM.
Step 4	Server /kvm # set kvm-portport		Specifies the port used for KVM communication.
Step 5	Server /kvm #	set local-video {yes	If local video is yes, the KVM session is also
	no}		displayed on any monitor attached to the server.
Step 6	Server /kvm # set max-sessions		Specifies the maximum number of concurrent KVM
	sessions		sessions allowed. The sessions argument is an integer
			between 1 and 4.
Step 7	Server /kvm #	commit	Commits the transaction to the system configuration.
Step 8	Server /kvm #	show [detail]	(Optional) Displays the virtual KVM configuration.

This example configures the virtual KVM and displays the configuration:

Server# scope kvm

Server /kvm # set enabled yes

Server /kvm *# set encrypted no

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

OL-28893-01 57