Cisco Systems 57712, UCSCPCIEBTG Launching Serial Over LAN, Server# connect host, Command mode

Managing Remote Presence

Launching Serial Over LAN

	Command or Action	Purpose
Step 6	Server /sol # show [detail]	(Optional) Displays the SoL settings.

This example configures SoL:

Server# scope sol

Server /sol # set enabled yes

Server /sol *# set baud-rate 115200

Server /sol		*# commit
Server /sol		# show	Com Port
Enabled Baud Rate(bps)
------- ---------------			--------
yes	115200		com2

Server /sol # show detail

Serial Over LAN:

Enabled: yes

Baud Rate(bps): 115200

Com Port: com2

Server /sol #

Launching Serial Over LAN

Procedure

	Command or Action	Purpose
Step 1	Server# connect host	Opens a serial over LAN (SoL) connection to the redirected
		server console port. You can enter this command in any
		command mode.

What to Do Next

To end the SoL session, you must close the CLI session. For example, to end an SoL session over an SSH connection, disconnect the SSH connection.

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

OL-28893-01 63