Cisco Systems UCSCPCIEBTG Deleting a Virtual Drive, Clear-foreign-config, # delete-virtual-drive

Managing Network Adapters

Deleting a Virtual Drive

	Command or Action	Purpose
Step 3	Server /chassis/storageadapter #	You are prompted to confirm the action. Enter yes
	clear-foreign-config	to confirm.
		Note	If you do not enter yes, the action is
			aborted.

This example shows how to clear all foreign configurations on the MegaRAID controller in slot 3:

Server# scope chassis

Server /chassis # scope storageadapter SLOT-3

Server /chassis/storageadapter # clear-foreign-config

Are you sure you want to clear all foreign configurations on this controller?

All data on the drive(s) will be lost.

Enter 'yes' to confirm -> yes

Server /chassis/storageadapter #

Deleting a Virtual Drive

Important This task deletes a virtual drive, including the drives that run the booted operating system. So back up any data that you want to retain before you delete a virtual drive.

Before You Begin

You must log in with admin privileges to perform this task.

Procedure

	Command or Action	Purpose
Step 1	Server# scope chassis	Enters the chassis command mode.
Step 2	Server /chassis # scope storageadapter slot	Enters command mode for an installed storage
		card.
Step 3	Server /chassis/storageadapter # scope	Enters command mode for the specified virtual
	virtual-drive drive-number	drive.
Step 4	Server /chassis/storageadapter/virtual-drive	You are prompted to confirm the action. Enter
	# delete-virtual-drive	yes to confirm.
		Note	If you do not enter yes, the action is
			aborted.

This example shows how to delete virtual drive 3.

Server# scope chassis

Server /chassis # scope storageadapter SLOT-3

Server /chassis/storageadapter # scope virtual-drive 3

Server /chassis/storageadapter/virtual-drive # delete-virtual-drive

	Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
118	OL-28893-01