Cisco Systems 57712, UCSCPCIEBTG manual Backing Up and Restoring the Adapter Configuration

Managing Network Adapters

Viewing Storage Controller Logs

Viewing Storage Controller Logs

Before You Begin

You must log in with admin privileges to perform this task.

Procedure

	Command or Action	Purpose
Step 1	Server# scope chassis	Enters the chassis command mode.
Step 2	Server /chassis # scope storageadapter slot	Enters command mode for an installed storage
		card.
Step 3	Server /chassis/storageadapter # show log	Displays the storage controller logs.

This example shows how to display storage controller logs:

Server # scope chassis

Server /chassis # scope storageadapter SLOT-3

Server /chassis/storageadapter # show log

Time		Severity	Description
----		--------	-------------
Fri March 1 09:52:19 2013		Warning	Predictive Failure
Fri March 1 07:50:19 2013		Info	Battery charge complete
Fri March 1 07:50:19 2013		Info	Battery charge started
Fri March 1 07:48:19 2013		Info	Battery relearn complete
Fri March 1	07:47:19 2013	Info	Battery is discharging
Fri March 1	07:45:19 2013	Info	Battery relearn started

Server /chassis/storageadapter #

Backing Up and Restoring the Adapter Configuration

Exporting the Adapter Configuration

The adapter configuration can be exported as an XML file to a TFTP server.

Important If any firmware or BIOS updates are in progress, do not export the adapter configuration until those tasks are complete.

Before You Begin

A supported Virtual Interface Card (VIC) must be installed in the chassis and the server must be powered on. Obtain the TFTP server IP address.

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

OL-28893-01 127