Cisco Systems 57712 Server /chassis # show storageadapter, Slot detail, Show, Capabilites detail

Models: 57712 UCSCPCIEBTG

1 288
Download 288 pages 20.54 Kb
Page 57
Image 57

Viewing Server Properties

Viewing Storage Adapter Properties

Procedure

 

Command or Action

Step 1

Server# scope chassis

Step 2

Server /chassis # show storageadapter

 

[slot] [detail]

Purpose

Enters the chassis command mode.

Displays installed storage cards.

Note This command displays all MegaRAID controllers on the server that can be managed through CIMC. If an installed controller or storage device is not displayed, then it cannot be managed through CIMC.

Step 3

Server /chassis # scope storageadapter slot

Enters command mode for an installed storage

 

 

 

card.

 

Step 4

Server /chassis/storageadapter # show bbu Displays battery backup unit information for the

 

[detail]

 

storage card.

Step 5

Server /chassis/storageadapter #

show

Displays RAID levels supported by the storage

 

capabilites [detail]

 

card.

 

Step 6

Server /chassis/storageadapter #

show

Displays number of errors seen by the storage

 

error-counters [detail]

 

card.

 

Step 7

Server /chassis/storageadapter #

show

Displays firmware version information for the

 

firmware-versions [detail]

 

storage card.

Step 8

Server /chassis/storageadapter #

show

Displays hardware information for the storage

 

hw-config [detail]

 

card.

 

Step 9

Server /chassis/storageadapter #

show

Displays manufacturer data for the storage card.

 

mfg-data [detail]

 

 

 

Step 10

Server /chassis/storageadapter #

show

Displays adapter PCI information for the storage

 

pci-info [detail]

 

card.

 

Step 11

Server /chassis/storageadapter #

show

Displays running firmware information for the

 

running-firmware-images [detail]

storage card.

Step 12

Server /chassis/storageadapter #

show

Displays adapter firmware settings for the storage

 

settings [detail]

 

card.

 

Step 13

Server /chassis/storageadapter #

show

Displays firmware images to be activated on

 

startup-firmware-images [detail]

startup for the storage card.

This example displays storage properties:

 

 

 

Server# scope chassis

 

 

 

Server /chassis # show storageadapter

Serial Number

Firmware Package Build

PCI Slot Product Name

--------

---------------------------------- --------------

-------------------------

SAS

LSI MegaRAID SAS 9260-8i

SV93404392

12.12.0-0038

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

OL-28893-01

41

Page 57
Image 57
Cisco Systems 57712 Server /chassis # show storageadapter, Slot detail, Server /chassis # scope storageadapter slot, Show