Cisco Systems 57712 Configuring Communication Services, Configuring Http, Server# scope http

C H A P T E R 10

Configuring Communication Services

This chapter includes the following sections:

•Configuring HTTP, page 133

•Configuring SSH, page 134

•Configuring XML API, page 135

•Configuring IPMI, page 136

•Configuring SNMP, page 137

Configuring HTTP

Before You Begin

You must log in as a user with admin privileges to configure HTTP.

Procedure

	Command or Action	Purpose
Step 1	Server# scope http	Enters the HTTP command mode.
Step 2	Server /http # set enabled {yes no}	Enables or disables HTTP and HTTPS service on the
		CIMC.
Step 3	Server /http # set http-portnumber	Sets the port to use for HTTP communication. The
		default is 80.
Step 4	Server /http # set https-portnumber Sets the port to use for HTTPS communication. The
		default is 443.
Step 5	Server /http # set http-redirect {yes	Enables or disables the redirection of an HTTP request
	no}	to HTTPS.

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

OL-28893-01 133