Cisco Systems 57712, UCSCPCIEBTG manual Resetting the Adapter, Activating Adapter Firmware

Managing Network Adapters

Activating Adapter Firmware

What to Do Next

To activate the new firmware, see Activating Adapter Firmware, on page 131.

Activating Adapter Firmware

Important While the activation is in progress, do not:

•Reset, power off, or shut down the server.

•Reboot or reset CIMC.

•Activate any other firmware.

•Export technical support or configuration data.

Before You Begin

You must log in with admin privileges to perform this task.

Procedure

	Command or Action
Step 1	Server# scope chassis
Step 2	Server /chassis # activate-adapter-fw
	pci-slot {1 2}

Purpose

Enters the chassis command mode.

Activates adapter firmware image 1 or 2 on the adapter in the specified PCI slot.

Note The changes will take effect upon the next server reboot.

This example activates adapter firmware image 2 on the adapter in PCI slot 1:

Server# scope chassis

Server /chassis # activate-adapter-fw 1 2

Firmware image activation suceeded

Please reset the server to run the activated image

Server /chassis #

What to Do Next

Reboot the server to apply the changes.

Resetting the Adapter

Before You Begin

You must log in with admin privileges to perform this task.

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

OL-28893-01 131