Cisco Systems 57712, UCSCPCIEBTG manual Server # scope bios, 163

CIMC Firmware Management

Installing BIOS Firmware from a Remote Server

	Command or Action	Purpose
Step 7	Server /bios # update protocol	Specifies the protocol to be used. It can be TFTP,
		FTP, SFTP, SCP or HTTP.
Step 8	Server /bios # update IP Address	Specifies the IP address or the host name of the
		remote server.
Step 9	Server /bios # update path	Specifies the file path to the BIOS firmware file on
		the remote server.

This example updates the BIOS firmware to CIMC software release 1.4(3j):

Server# scope cimc

Server /cimc # scope firmware

Server /cimc/firmware # show detail

Firmware Image Information:

Update Stage: NONE

Update Progress: 100

Current FW Version: 1.4(3j)

FW Image 1 Version: 1.4(3j)

FW Image 1 State: RUNNING ACTIVATED

FW Image 2 Version: 1.3(3a)

FW Image 2 State: BACKUP INACTIVATED

Boot-loader Version: 1.4(3.21).18

Server /cimc/firmware # top

Server # scope bios

Server /bios # update ftp 192.0.20.34 //upgrade_bios_files/C260-BIOS-1-4-3j-0.CAP <CR> Press Enter key

Firmware update has started.

Please check the status using "show detail"

Server /bios #

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

OL-28893-01 163