Cisco Systems 57712 manual Viewing vHBA Properties, Host-fc-if fc0 fc1 name detail, All vHBAs

Managing Network Adapters

Viewing vHBA Properties

Note If Network Interface Virtualization (NIV) mode is enabled for the adapter, you must assign a channel number to a vHBA when you create it.

•When using the Cisco UCS P81E Virtual Interface Card or Cisco UCS VIC1225 Virtual Interface Card in an FCoE application, you must associate the vHBA with the FCoE VLAN. Follow the instructions in to assign the VLAN.

•After making configuration changes, you must reboot the host for settings to take effect.

Viewing vHBA Properties

Procedure

	Command or Action	Purpose
Step 1	Server# scope chassis	Enters the chassis command mode.
Step 2	Server /chassis # scope adapter index	Enters the command mode for the adapter card at the
		PCI slot number specified by index.
		Note	The server must be powered on before you
			can view or change adapter settings.
Step 3	Server /chassis/adapter # show	Displays properties of a single vHBA, if specified, or
	host-fc-if [fc0 fc1 name] [detail]	all vHBAs.

This example displays all vHBAs on adapter card 1 and the detailed properties of fc0:

Server# scope chassis
Server /chassis # scope adapter 1
Server /chassis/adapter # show host-fc-if
Name	World Wide Port Name	FC SAN Boot Uplink Port
--------	------------------------	----------- -----------
fc0	20:00:00:22:BD:D6:5C:35	Disabled	0
fc1	20:00:00:22:BD:D6:5C:36	Disabled	1

Server /chassis/adapter # show host-fc-if fc0 detail

Name fc0:

World Wide Node Name: 10:00:00:22:BD:D6:5C:35

World Wide Port Name: 20:00:00:22:BD:D6:5C:35

FC SAN Boot: Disabled

Persistent LUN Binding: Disabled

Uplink Port: 0

MAC Address: 00:22:BD:D6:5C:35

CoS: 3

VLAN: NONE

Rate Limiting: OFF

PCIe Device Order: ANY

EDTOV: 2000

RATOV: 10000

Maximum Data Field Size: 2112

Channel Number: 3

Port Profile:

Server /chassis/adapter #

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

OL-28893-01 87