Managing Network Adapters

Initializing a Virtual Drive

Are you sure you want to delete virtual drive 3?

All data on the drive will be lost. Enter 'yes' to confirm -> yes

Server /chassis/storageadapter/virtual-drive #

Initializing a Virtual Drive

All data on a virtual drive is lost when you initialize the drive. Before you run an initialization, back up any data on the virtual drive that you want to save.

Before You Begin

You must log in with admin privileges to perform this task.

Procedure

 

Command or Action

Purpose

Step 1

Server# scope chassis

Enters the chassis command mode.

Step 2

Server /chassis # scope storageadapter slot

Enters command mode for an installed

 

 

storage card.

Step 3

Server /chassis/storageadapter # scope

Enters command mode for the specified

 

virtual-drive drive-number

virtual drive.

Step 4

Server /chassis/storageadapter/virtual-drive #

Initializes the specified virtual drive.

 

start-initialization

 

Step 5

Server /chassis/storageadapter/virtual-drive #

(Optional) Cancels the initialization of the

 

cancel-initialization

specified virtual drive.

Step 6

Server /chassis/storageadapter/physical-drive

Displays the status of the task that is in

 

# get-operation-status

progress on the drive.

This example shows how to initialize virtual drive 3 using fast initialization:

Server# scope chassis

Server /chassis # scope storageadapter SLOT-3

Server /chassis/storageadapter # scope virtual-drive 3

Server /chassis/storageadapter/virtual-drive # start-initialization

Are you sure you want to initialize virtual drive 3?

All data on the drive will be lost. Enter 'yes' to confirm -> yes

Fast (0) or full (1) initialization? -> 0

Server /chassis/storageadapter/virtual-drive # get-operation-status

progress-percent: 20%

elapsed -seconds: 30

operation-in-progress: initializing virtual drive

Server /chassis/storageadapter/virtual-drive #

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

OL-28893-01

119

Page 135
Image 135
Cisco Systems 57712 Initializing a Virtual Drive, Start-initialization, Cancel-initialization, # get-operation-status