Cisco Systems UCSCPCIEBTG, 57712 Toggling the Locator LED for a Physical Drive, Start-learn-cycle

Managing Network Adapters

Toggling the Locator LED for a Physical Drive

Procedure

	Command or Action	Purpose
Step 1	Server# scope chassis	Enters the chassis command mode.
Step 2	Server /chassis # scope storageadapter slot	Enters command mode for an installed storage
		card.
Step 3	Server /chassis/storageadapter # scope bbu	Enter the battery backup unit command mode.
Step 4	Server /chassis/storageadapter #	Starts the learn cycle for the battery.
	start-learn-cycle

This example shows how to initiate the learn cycles for a battery:

Server # scope chassis

Server /chassis # scope storageadapter SLOT-2

Server /chassis/storageadapter # scope bbu

Server /chassis/storageadapter/bbu # start-learn-cycle

Server /chassis/storageadapter/bbu #

Toggling the Locator LED for a Physical Drive

Before You Begin

You must be logged in as an admin to perform this task.

Procedure

	Command or Action	Purpose
Step 1	Server# scope chassis	Enters the chassis command mode.
Step 2	Server /chassis # scope storageadapter slot	Enters command mode for an installed
		storage card.
Step 3	Server /chassis/storageadapter # scope	Enters the physical drive command mode.
	physical-drive 3
Step 4	Server /chassis/storageadapter/physical-drive	Enables or disables the physical drive locator
	# locator-led {on off}	LED.

This example shows how to enable the locator LED for physical drive 3:

Server # scope chassis

Server /chassis # scope storageadapter SLOT-2

Server /chassis/storageadapter # scope physical-drive 3

Server /chassis/storageadapter/physical-drive # locator-led on

Server /chassis/storageadapter/physical-drive* # commit

Server /chassis/storageadapter/physical-drive #

	Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
126	OL-28893-01