Cisco Systems UCSCPCIEBTG, 57712 manual Activating Installed Cimc Firmware

CIMC Firmware Management

Activating Installed CIMC Firmware

Note If you start an update while an update is already in process, both updates will fail.

Procedure

	Command or Action	Purpose
Step 1	Server# scope cimc	Enters the CIMC command mode.
Step 2	Server /cimc # scope firmware	Enters the CIMC firmware command mode.
Step 3	Server /cimc/firmware # update	Specifies the protocol, IP address of the remote server
	protocol IP Address path	and the file path to the firmware file on the server. The
		protocol can be one of the following:
		• TFTP
		• FTP
		• SFTP
		• SCP
		• HTTP
Step 4	Server /cimc/firmware # show detail	(Optional)
		Displays the progress of the firmware update.

This example updates the CIMC firmware:

Server# scope cimc

Server /cimc # scope firmware

Server /cimc/firmware # update ftp 192.0.20.34 //test/dnld-ucs-k9-bundle.1.0.2h.bin<CR> Press Enter key

Firmware update has started.

Please check the status using "show detail"

Server /cimc/firmware #

What to Do Next

Activate the new firmware.

Activating Installed CIMC Firmware

Before You Begin

Install the CIMC firmware on the server.

	Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
160	OL-28893-01