Cisco Systems UCSCPCIEBTG, 57712 manual # set raid-primary-member slot1, Slot2

Managing the Server

Configuring the Flexible Flash Controller Properties

	Command or Action	Purpose
	# set raid-primary-member {slot1	Important	Currently, Cisco Flexible Flash cards are
	slot2}		supported in slot 1 and slot 2. Therefore, you
			can specify slot1 or slot2.
Step 5	Server	The role of the secondary RAID. The currently supported
	/chassis/flexflash/operational-profile	value is active.

#set raid-secondary-role {active initializing}

Step 6	Server	Specifies the number of read errors that are permitted while
	/chassis/flexflash/operational-profile	accessing the Cisco Flexible Flash card. If the number of
	# set read-error-count-threshold	errors exceeds this threshold, the Cisco Flexible Flash card
		is disabled and you must reset it manually before CIMC
		attempts to access it again.
		To specify a read error threshold, enter an integer between
		1 and 255. To specify that the card should never be disabled
		regardless of the number of errors encountered, enter 0 (zero).
Step 7	Server	Specifies the number of write errors that are permitted while
	/chassis/flexflash/operational-profile	accessing the Cisco Flexible Flash card. If the number of
	# set write-error-count-threshold	errors exceeds this threshold, the Cisco Flexible Flash card
		is disabled and you must reset it manually before CIMC
		attempts to access it again.
		To specify a write error threshold, enter an integer between
		1 and 255. To specify that the card should never be disabled
		regardless of the number of errors encountered, enter 0 (zero).
Step 8	Server	Specifies a list of virtual drives to be made available to the
	/chassis/flexflash/operational-profile	server as a USB-style drive. The options are as follows:
	# set virtual-drives-enabled list	• SCU—The server can access the Cisco UCS Server
		Configuration Utility.
		• DRIVERS—The server can access the Cisco drivers
		volume.
		• HV—The server can access a user-installed hypervisor.
		• HUU—The server can access the Cisco Host Upgrade
		Utility.
		When specifying more than one option, you must enclose
		the list in quotation marks (").
Step 9	Server /chassis/adapter # commit	Commits the transaction to the system configuration.

This example shows how to configure the properties of the Flash controller:

Server# scope chassis

Server /chassis # scope flexflash FlexFlash-0

Server /chassis/flexflash # scope operational-profile

Server /chassis/flexflash/operational-profile # set read-error-count-threshold 100

	Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
26	OL-28893-01