Cisco Systems 57712 Disabling Auto Learn Cycles for the Battery Backup Unit, Disable-auto-learn

Managing Network Adapters

Disabling Auto Learn Cycles for the Battery Backup Unit

This example shows how to enable the battery auto-learn cycles:

Server # scope chassis

Server /chassis # scope storageadapter SLOT-2Server /chassis/storageadapter # scope bbu

Server /chassis/storageadapter/bbu # enable-auto-learnAutomatic BBU learn cycles will occur without notice if enabled. Are you sure? [y/n] --> y

enable-auto-learn initiated

Server /chassis/storageadapter/bbu #

Disabling Auto Learn Cycles for the Battery Backup Unit

Before You Begin

You must log in with admin privileges to perform this task.

Procedure

	Command or Action	Purpose
Step 1	Server# scope chassis	Enters the chassis command mode.
Step 2	Server /chassis # scope storageadapter slot	Enters command mode for an installed storage
		card.
Step 3	Server /chassis/storageadapter # scope bbu	Enter the battery backup unit command mode.
Step 4	Server /chassis/storageadapter #	Disables the battery auto-learn cycles
	disable-auto-learn

This example shows how to disables the battery auto-learn cycles:

Server # scope chassis

Server /chassis # scope storageadapter SLOT-2Server /chassis/storageadapter # scope bbu

Server /chassis/storageadapter/bbu # disable-auto-learnAutomatic BBU learn cycles will no longer occur if disabled. Are you sure? [y/n] --> y

disable-auto-learn initiated

Server /chassis/storageadapter/bbu #

Starting a Learn Cycle for a Battery Backup Unit

Before You Begin

You must be logged in as an admin to use this command.

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

OL-28893-01 125