Cisco Systems 57712 manual Restoring Adapter Defaults, Adapter-reset-defaults index, Argument

Managing Network Adapters

Restoring Adapter Defaults

Command or Action

Step 3 Server /chassis/adapter # import-vnictftp-ip-addresspath-and-filename

Purpose

Note The server must be powered on before you can view or change adapter settings.

Starts the import operation. The adapter downloads the configuration file from the specified path on the TFTP server at the specified IP address. The configuration will be installed during the next server reboot.

This example imports a configuration for the adapter in PCI slot 1:

Server# scope chassis

Server /chassis # scope adapter 1

Server /chassis/adapter # import-vnic 192.0.2.34 /ucs/backups/adapter4.xml

Import succeeded.

New VNIC adapter settings will take effect upon the next server reset.

Server /chassis/adapter #

What to Do Next

Reboot the server to apply the imported configuration.

Restoring Adapter Defaults

Before You Begin

You must log in with admin privileges to perform this task.

Procedure

	Command or Action	Purpose
Step 1	Server# scope chassis	Enters the chassis command mode.
Step 2	Server /chassis #	Restores factory default settings for the adapter at
	adapter-reset-defaults index	the PCI slot number specified by the index
		argument.

This example restores the default configuration of the adapter in PCI slot 1:

Server# scope chassis

Server /chassis # adapter-reset-defaults 1

This operation will reset the adapter to factory default.

All your configuration will be lost.

Continue?[yN] y

Server /chassis #

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

OL-28893-01 129