Samsung SCX-5835NX Device Info, Registration and Contact Info. You may enter, Date & Time, Timers

OPTION	DESCRIPTION
Device Info	The sub-options available are Service Center
	Registration and Contact Info. You may enter
	information on service center and purchasing
	point.
Date & Time	You can set the date and time. (See "Setting the
	date and time" on page 33.)
Default Settings	• Default Window: Set the first window that
	appears on the display screen after the
	machine wakes up from the Power Save
	mode. For example, if you select Fax as a
	default window, the first window will be the
	Basic tab of the Fax feature. If you want to
	show ID Copy as a default window, you need
	to enable this feature in Default Option.
	• Default Option: Changes all the default
	values for copying, faxing, emailing, scanning
	and paper at once. (See "Changing the
	default settings" on page 34.)
	• Home: Allows user to arrange each function
	in the display screen.

	Depending on the optional kit installed or
	the category selected, the selectable
	options on the display screen may differ.
Measurements	This option lets you change the unit of (mm or
	inch) and set the numeric separation (comma or
	period).
Timers	The machine cancels a printing job if data is not
	received in specific time.

•System Timeout: The machine returns to the default value after waiting a certain length of time.

You can set a time for maximum 10 minutes.

•Held Job Timeout: The machine holds a job for a specific time period.

Language	Allows you to change the language that appears
	on the touch screen.
Power Saver	Reduce energy consumption by setting power
	saving features. (See "Using power saving
	feature" on page 34.)

OPTION	DESCRIPTION
Tray Management	Allows you to select the tray and paper for a
	printing job. Tray Confirmation Message
	activates the window asking whether you set the
	paper size and type for the tray that was just
	opened.
	• Auto Tray Switch: With this option On and
	both tray1 and tray2 are filled with letter size
	paper, the machine automatically prints from
	tray2 after tray1 is empty.
	• Auto Continue: When the paper is
	mismatched, meaning that tray1 has filled
	with the letter size paper, but the printing job
	needs A4 size paper, the machine will wait
	for 30 seconds for paper in tray1 with proper
	sized paper. After 30 seconds, the machine
	automatically starts printing with letter-sized
	paper.
Altitude Adjustment	Print quality is affected by atmospheric pressure.
	The atmospheric pressure is determined by the
	height of the machine above sea level. This
	feature lets you adjust the altitude in a height
	district. The higher the altitude, the higher the
	adjustment, the highest being High 1. (See
	"Altitude adjustment" on page 33.)
Contention	This feature lets you to select the priority
Management	between copy jobs and print jobs.
	• Priority: Set the priority by numbering the
	job. The machine starts from the least to the
	highest number in order.
	• First In, First Out: The machine does an
	asked job in order.
Sound	You can adjust the noise level of the machine
	sound. Press Fault to adjust the machine's error
	sound. Select Conflict if you pressed the wrong
	option. Press Selection to have the machine
	make a sound whenever you press the selection
	from your touch screen.
Supplies	The machine notifies you when to reorder toner
Management	cartridge and resets the used fuser counter, bias
	transfer roller, feed roller and document feeder
	friction pad counter.
Machine Test	You can test the machine by using the Image
	Quality Test Patterns and Loopback Test.
On Demand	You can set the machine to delete previous job
Overwrite	information on HDD when you store new job
	information. To activate this feature, go to
	Admin Setting > the Setup tab > Optional
	Service.
	Set the On Demand Image Overwrite option to
	Enable. After activating this feature, you can
	overwrite an HDD by pressing Start in the
	display.

Machine status and advanced feature_ 86