Samsung SCX-5835NX, 5935NX manual Network Setup

OPTION	DESCRIPTION
Redial	If recipient’s fax machine is busy or not answering,
	the machine can automatically redial a remote fax
	machine. You can set the number of redial
	attempts and the interval between attempts.
	Selecting 0 for Redial Times means that the
	machine will not redial.
Speaker Volume	This controls the sound when a fax actually starts
	to transfer data. If this option is On, the machine
	emits sound from the beginning to the completion
	of a fax. With Comm, the machine emits sound
	only until the communication has succeeded.
	There is no sound with Off option.
Prefix Dial	This feature allows you to set a prefix of up to five
	digits. User may set this to access a
	PABX(example *9) or area code number (example
	02).
Junk Fax Setup	The machine does not accept faxes sent from
	remote stations if their numbers are stored in the
	memory as junk fax numbers. You can enter a
	maximum of 10 junk fax numbers. Press Junk
	Fax Setup, select number and Edit. then, enter
	the last numbers (1~7 digit) of the fax number.
Ring Volume	This feature adjusts the ring volume. When you
	select Off, the machine does not ring.
Dial Tone Volume	When you press On Hook Dial to send a fax, you
	can hear a specific tone. To adjust the tone
	volume, use this feature. Value 1 is the lowest
	volume. Use left/right arrows to adjust the value.
Mailbox Setup	• Document Policy: You can set the document
	stored in Mailbox to delete or retain documents
	after completion. Select On for each option to
	delete, Off to retain the data.
	• Mail Configuration: You can create, edit, or
	delete Mailbox. Enter Mailbox ID, Mailbox
	Name, Mailbox Passcode by pressing options.
	(See "Using mailbox" on page 68.)
	If you set the Notification option to On, you
	are notified when a fax is received in
	Mailbox. (See "Creating Mailbox" on
	page 68.)
Output Tray	This feature lets you select the paper tray to use
	for receiving a fax.
Toll Save	Set the machine to send a fax in the toll save time
	for saving. (See "Sending a fax in toll save time"
	on page 68.)

OPTION	DESCRIPTION
Send Batch	If the fax number you have dialed is the same as
	the delay fax number, the machine asks whether
	you want to add the documents to the reserved
	delay fax. (See "Adding documents to a reserved
	delay fax job" on page 64.)
Fax Forward	You can forward a sent or received fax to other
Settings	destinations via fax or email. (See "Forwarding a
	fax to other destination" on page 68.)
Fax Ending Sound	This setting determines whether the end fax tone
	is on or off. When the fax receiving job is finished,
	machine will give an signal sound. (See "Setting
	up the fax ending tone" on page 69.)

NETWORK SETUP

You may set up the network with the machine's touch screen. Before doing that, you must have the relevant information concerning the type of network protocols and computer system you use. If you are not sure which setting to use, contact your network administrator to configure this machine to the network.

1.Press Machine Setup on the control panel.

2.Press Admin Setting. When the login message pops up, enter password and press OK.

3.Press the Setup tab > Network Setup.

OPTION	DESCRIPTION
TCP/IP Protocol	Select appropriate protocol and configure
	parameters to use the network environment.
	There are lots of parameters to be set.
	Therefore, if you are not sure, leave as is, or
	consult the network administrator.
Ethernet Speed	Configure the network transmission speed.
Clear Setting	Reverts the network settings to the default values.

Machine status and advanced feature_ 88