Samsung 5935NX manual Using Setip Program, Installing the program, Setting network values, Send to

2.Scan Setting window opens.

1	Select	Allows you to select between the Local or Network
	Scanner	scanner.
2	Select	Allows you to save settings frequently used for
	Profile	future use. Click New Profile to save the setting.
3	Scan	Allows you to customize settings for Scan Size
	Settings	and Paper Source.
4	Scan To	Allows you to customize settings for File Name
		and location to send scanned data.

Click Advanced button to set more scan options.

3.Set scan settings and click Scan.

For more information, click Help > SmarThru Office help.

Send to

FTP

You can upload files to an FTP server while working on SmarThru Office.

1.Select File > Send to > Send By FTP.

2.Send By FTP window opens.

3.Add your file and click Upload.

Email

You can send email while working on SmarThru Office.

You need an email client program, such as Outlook Express, to send email in SmarThru Office. Procedure for sending email may differ depending on email client program you are using.

1.Select File > Send to> Send By E-mail.

2.An email client opens.

3.Type in necessary information and send your email.

Fax

You can send emails while working on SmarThru Office.

1.Select File > Send to > Send By Fax.

2.Send Fax window opens.

3.Type in necessary information and click Send Fax.

For more information about SmarThru Office, click Help > SmarThru Office help. The SmarThru Office Help window appears; you can view on screen help supplied on the SmarThru program.

Follow the steps below to uninstall SmarThru Office.

Before you begin the uninstall, ensure that all applications are closed on your computer.

a)From the Start menu, select Programs or All Programs.

b)Select SmarThru Office, and then select Uninstall SmarThru Office.

c)When your computer asks you to confirm your selection, read the statement and click OK.

d)Click Finish.

USING SETIP PROGRAM

Macintosh and Linux do not support this program.

This program is for the network IP setting using the MAC address which is the hardware serial number of the network printer card or interface.

It is especially for the network administrator to set several network IPs at the same time.

You can only use the SetIP program when your machine is connected to a network.

Installing the program

1.Insert the software CD provided with your machine. When the software CD runs automatically, close the window.

2.From the Start menu select My Computer and open the X drive. ( X represents your CD-ROM drive.)

3.Double click Application > SetIP.

4.Double-click Setup.exe to install this program.

5.Click OK.

6.If necessary, select a language from the drop-down list..

7.Follow the instructions in the window to complete the installation.

Printing out the machine’s MAC address

1.Press Machine Setup on the control panel.

2.Press Machine Status > the Machine Info tab > Print/Report.

3.Press System Report.

4.Scroll down the list on the right and select Network Configuration Report.

5.Press Print

Setting network values

1.Print the machine’s Network Configuration Report to find your machine’s MAC address.

2.From the Windows Start menu, select Programe or All Programs > Samsung Network Printer Utilities > SetIP > SetIP.

3.Click to open the TCP/IP configuration window.

4.Enter the network card’s MAC address, IP address, subnet mask, default gateway, and then click Apply.

When you enter the MAC address, enter it without a colon(:).

5.Click OK. The machine prints the network information. Confirm the settings are correct.

6.Click Exit.

Management tools_ 95