PurposeCommand or Action
Commitsthe transaction to the system
configuration.
Server/fault # commit
Step 3
(Optional)Displays the platform event alert
configuration.
Server/fault # show[detail]
Step 4
Thefollowing example enables platformevent alerts:
Server# scope fault
Server /fault # set platform-event-enabled yes
Server /fault *# commit
Server /fault # show
SNMP Community String Platform Event Enabled
--------------------- -----------------------
public yes
Server /fault #
Disabling Platform Event Alerts
Procedure
PurposeCommand or Action
Entersthe fault command mode.Server# scopefault
Step 1
Disablesplatform event alerts.Server/fault # set
platform-event-enabledno
Step 2
Commitsthe transaction to the system
configuration.
Server/fault # commit
Step 3
(Optional)Displays the platform event alert
configuration.
Server/fault # show[detail]
Step 4
Thefollowing example disables platformevent alerts:
Server# scope fault
Server /fault # set platform-event-enabled no
Server /fault *# commit
Server /fault # show
SNMP Community String Platform Event Enabled
--------------------- -----------------------
public no
Server /fault #
Configuring Platform Event Filters
Youcan configure actions and alerts for the following platform event filters:
Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
150 OL-28893-01
Configuring Platform Event Filters
Disabling Platform Event Alerts