Cisco Systems 57712, UCSCPCIEBTG manual Platform Event Filter, None reboot power-cycle, Power-off

Configuring Platform Event Filters

Configuring Platform Event Filters

ID	Platform Event Filter
1	Temperature Critical Assert Filter
2	Temperature Warning Assert Filter
3	Voltage Critical Assert Filter
4	Current Assert Filter
5	Fan Critical Assert Filter
6	Processor Assert Filter
7	Power Supply Critical Assert Filter
8	Power Supply Warning Assert Filter
9	Power Supply Redundancy Lost Filter
10	Discrete Power Supply Assert Filter
11	Memory Assert Filter
12	Drive Slot Assert Filter

Procedure

	Command or Action	Purpose
Step 1	Server# scope fault	Enters the fault command mode.
Step 2	Server /fault # scope pef id	Enters the platform event filter command mode for the
		specified event.
		See the Platform Event Filter table for event ID numbers.
Step 3	Server /fault/pef # set action	Selects the desired system action when this event occurs. The
	{none reboot power-cycle	action can be one of the following:
	power-off}	• none —No system action is taken.
		• reboot —The server is rebooted.
		• power-cycle—The server is power cycled.
		• power-off—The server is powered off.
Step 4	Server /fault/pef # set send-alert	Enables or disables the sending of a platform event alert for
	{yes no}	this event.

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

OL-28893-01 151