Cisco Systems UCSCPCIEBTG, 57712 Undo Preparing a Drive for Removal, Undo-prepare-for-removal

Managing Network Adapters

Undo Preparing a Drive for Removal

Undo Preparing a Drive for Removal

Before You Begin

You must log in with admin privileges to perform this task.

Procedure

	Command or Action	Purpose
Step 1	Server# scope chassis	Enters the chassis command mode.
Step 2	Server /chassis # scope storageadapter slot	Enters command mode for an installed
		storage card.
Step 3	Server /chassis/storageadapter # scope	Enters command mode for the specified
	physical-drive drive-number	physical drive.
Step 4	Server /chassis/storageadapter/physical-drive #
	undo-prepare-for-removal

This example shows how to respin physical drive 3 after preparing the drive for removal.

Server# scope chassis

Server /chassis # scope storageadapter SLOT-3

Server /chassis/storageadapter # scope physical-drive 3

Server /chassis/storageadapter/physical-drive # undo-prepare-for-removal

Server /chassis/storageadapter/physical-drive #

Enabling Auto Learn Cycles for the Battery Backup Unit

Before You Begin

You must log in with admin privileges to perform this task.

Procedure

	Command or Action	Purpose
Step 1	Server# scope chassis	Enters the chassis command mode.
Step 2	Server /chassis # scope storageadapter slot	Enters command mode for an installed storage
		card.
Step 3	Server /chassis/storageadapter # scope bbu	Enter the battery backup unit command mode.
Step 4	Server /chassis/storageadapter #	Enables the battery auto-learn cycles
	enable-auto-learn

	Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
124	OL-28893-01