Cisco Systems UCSCPCIEBTG, 57712 manual Importing the Adapter Configuration

Managing Network Adapters

Importing the Adapter Configuration

Procedure

	Command or Action	Purpose
Step 1	Server# scope chassis	Enters the chassis command mode.
Step 2	Server /chassis # scope adapter	Enters the command mode for the adapter card at the PCI
	index	slot number specified by index.
		Note	The server must be powered on before you can view
			or change adapter settings.

Step 3 Server /chassis/adapter # export-vnicprotocol remote server IP address

Starts the export operation. The adapter configuration file will be stored at the specified path and filename on the remote server at the specified IP address. The protocol can be one of the following:

•TFTP

•FTP

•SFTP

•SCP

•HTTP

This example exports the configuration of adapter 1:

Server# scope chassis		adapter 1
Server /chassis # scope
Server	/chassis/adapter	# export-vnic ftp 192.0.20.34 //test/dnld-ucs-k9-bundle.1.0.2h.bin
Server	/chassis/adapter	#

Importing the Adapter Configuration

Important If any firmware or BIOS updates are in progress, do not import the adapter configuration until those tasks are complete.

Before You Begin

You must log in with admin privileges to perform this task.

Procedure

	Command or Action	Purpose
Step 1	Server# scope chassis	Enters the chassis command mode.
Step 2	Server /chassis # scope adapter	Enters the command mode for the adapter card at the PCI
	index	slot number specified by index.

	Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5
128	OL-28893-01