Cisco Systems 57712 Management interface, the virtual Ethernet, and the VIF on, With a hyphen

Configuring Network-Related Settings

Connecting to a Port Profile

Procedure

	Command or Action	Purpose
Step 1	Server# scope cimc	Enters the CIMC command mode.
Step 2	Server /cimc # scope network	Enters the CIMC network command mode.
Step 3	Server /cimc/network # set	Specifies the port profile CIMC should use to configure the
	port-profileport_profile_name	management interface, the virtual Ethernet, and the VIF on
		supported adapter cards such as the Cisco UCS VIC1225
		Virtual Interface Card.
		Enter up to 80 alphanumeric characters. You cannot use
		spaces or other special characters except for - (hyphen) and
		_ (underscore). In addition, the port profile name cannot begin
		with a hyphen.
		Note	The port profile must be defined on the switch to
			which this server is connected.
Step 4	Server /cimc/network # commit	Commits the transaction to the system configuration.
Step 5	Server /cimc/network # show	(Optional)
	[detail]	Displays the network settings.

This example connects to port profile abcde12345:

Server# scope cimc

Server /cimc # scope network

Server /cimc/network # set port-profile abcde12345

Server /cimc/network *# commit

Server /cimc/network # show detail

Network Setting:

IPv4 Address: 10.193.66.174

IPv4 Netmask: 255.255.248.0

IPv4 Gateway: 10.193.64.1

DHCP Enabled: no

Obtain DNS Server by DHCP: no

Preferred DNS: 0.0.0.0

Alternate DNS: 0.0.0.0

VLAN Enabled: no

VLAN ID: 1

VLAN Priority: 0

Port Profile: abcde12345

Hostname: Server

MAC Address: 50:3D:E5:9D:63:3C

NIC Mode: dedicated

NIC Redundancy: none

Server /cimc/network #

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

OL-28893-01 79