Button Manager Settings, Contents 21 Index | Sharp AR-203E specs

3 Button Manager Settings

After being installed, Button Manager normally keeps active under the Windows operating system. Follow the steps shown below to set scan options as you like.

For details on the settings in the setting screen of Button Manager, see Button Manager Help.

1 Rightbar. -click the Button Manager icon () on the task

If the Button Manager icon does not appear on the task bar, click the "start" button, select "All

Programs" ("Programs" on Windows 98/Me/2000), Note select "SHARP Button Manager S", and then click

"Button Manager" to start Button Manager.

	2		Select "Settings" from the displayed pop-up menu.
	2		The setting screen of Button Manager will open.
			The setting screen of Button Manager will open.
Reference: Outline of Button Manager

	3		Click the tab of the scan menu you want to set up.

4	Set up the start-up application in the "Application
	Selection" area.

zWhen the "Show TWAIN setting screen when

	scanning" checkbox is selected, the scan
Note	setting screen appears when scanning is
Note	executed to let you adjust the scanning
	conditions.

zIf an application other than "Sharpdesk" is selected in the "Application Selection" area, only one original can normally be scanned. If "Sharpdesk" is selected, multiple originals loaded in the SPF can be scanned in a single operation.

Reference: Outline of Button Manager

5	Set up the "Color Mode", "Edge" and other scan
	settings in the "Scan Setup" area.

Reference: Outline of Button Manager

6

Click the "OK" button.

You have completed the settings.

CONTENTS 21 INDEX

Image 23

Sharp AR-203E manual Button Manager Settings, Contents 21 Index

Contents

AR-203E Online Manual Contents How to Print Out the Online Manual How to Use the Online ManualContents How to Control the Online Manual Printing Overview Contents 2 Index Current printer. If you intend to change any print Contents 3 IndexBasic Printing Make sure that Sharp AR-xxxx is selected as Windows 98/Me Windows 2000/XP/Vista Contents 5 Index Printer Driver Settings Printing a Watermark Contents 6 Index Fitting the Printed Image to the Paper Printing Multiple Pages on One Outline of the Print Status Window Contents 9 Index Scanning Overview Flow chart shown below provides scanning overview Contents 11 Index Position in which you placed the original in Step Select Acquire Image from the File menu, orClick the Acquire button Scanning Position menu, select Set-up screen Contents 13 Index Contents 14 Index Contents 15 Index Contents 16 Index Contents 17 Index Contents 18 Index Click the Finish button Contents 19 Index Outline of Button Manager Contents 20 Index Contents 21 Index Button Manager Settings Contents 22 Index Identifying Unit Problems USB cable Contents 23 IndexCheck 2 Is the interface cable connected securely? If the USB cable becomes disconnected Check 2 Is your hard disk fragmented? Contents 24 IndexCheck Your Computer Check 1 Is there enough computer memory or hard disk space? Click the icon beside the Universal Serial Bus Contents 25 IndexWhen you make sure that the USB port is enabled Install the software, referring to Installing Contents 26 Index Faint, Uneven or Smeared Print Output Contents 27 Index Check 3 Is the paper loaded correctly? Contents 28 IndexCheck 2 Is the orientation of document setting correct? Check 1 Has a paper jam occurred? Check 2 Is the on Line indicator off?Check 4 Has the printer driver been installed properly? Nothing Prints Poor Scanning Result Contents 30 IndexCheck 1 Is the original clean? Check 2 Have you specified a suitable resolution? Check 3 Have you set the original correctly on the SPF? Contents 31 IndexScanned Image is Incorrectly Positioned Check 1 Have you placed the original straight? Unable to Scan the Image Contents 32 Index Restart your computer Contents 33 IndexClick Add or Remove Programs Tab Setting Selections Initial setting Printer Driver Features part Image Adjustment Contents 35 Index Twain Index AR203Ev1