Cisco Systems 57712 manual Server Management Bios Parameters for C460 Servers, Assert NMI on Serr

BIOS Parameters by Server Model

Server Management BIOS Parameters for C460 Servers

Server Management BIOS Parameters for C460 Servers

Name	Description
Assert NMI on SERR	Whether the BIOS generates a non-maskable interrupt (NMI)
	and logs an error when a system error (SERR) occurs. This can
	be one of the following:
	• Disabled—The BIOS does not generate an NMI or log an
		error when a SERR occurs.
	• Enabled—The BIOS generates an NMI and logs an error
		when a SERR occurs. You must enable this setting if you
		want to enable .
Assert NMI on PERR	Whether the BIOS generates a non-maskable interrupt (NMI)
	and logs an error when a processor bus parity error (PERR)
	occurs. This can be one of the following:
	• Disabled—The BIOS does not generate an NMI or log an
		error when a PERR occurs.
	• Enabled—The BIOS generates an NMI and logs an error
		when a PERR occurs. You must enable to use this setting.
Console Redirection	Allows a serial port to be used for console redirection during
	POST and BIOS booting. After the BIOS has booted and the
	operating system is responsible for the server, console redirection
	is irrelevant and has no effect. This can be one of the following:
	• Disabled—No console redirection occurs during POST.
	• —Enables console redirection on serial port A during
		POST.
	Note	If you enable this option, you also disable the display
		of the Quiet Boot logo screen during POST.
Flow Control	Whether a handshake protocol is used for flow control. Request
	to Send / Clear to Send (RTS/CTS) helps to reduce frame
	collisions that can be introduced by a hidden terminal problem.
	This can be one of the following:
	• None—No flow control is used.
	• RTS-CTS—RTS/CTS is used for flow control.
	Note	This setting must match the setting on the remote
		terminal application.

Cisco UCS C-Series Servers Integrated Management Controller CLI Configuration Guide, Release 1.5

OL-28893-01 263