Worth Data 802 RF user manual RF System Setup, RF Terminal Setup, RF Terminal Default Settings

Chapter 2

RF System Setup

RF Terminal Setup

The RF Terminal itself can be configured using the Terminal keypad or by using the bar coded Setup Menu, which is in the back of your manual. Even if you configure the RF Terminal using the keypad, you may need the bar coded Setup

Menu to use as a reference. Most users do not need to change anything in the setup. Some parameters are available only by bar code menu and others only by keypad:

Bar Code Menu Only	Keypad Only
Reset	Server IP
	Device IP
	Starting Channel
	SSID
	Subnet Mask
	WEP Encryption Key
	Control Keys Only
	Automatic Check Back
	Skip Opening Screens
	Display of Year
	Date and Time
	Aiming Dot Duration
	Display Backlighting

If you are using the bar coded Setup Menu and are unfamiliar with scanning bar codes, see Appendix M; How to scan a bar code to learn proper scanning

technique before you begin scanning the bar codes on the Setup Menu.

RF Terminal Default Settings

This is the default configuration of the RF Terminal as it is shipped from the factory. If you ever need to return the RF Terminal to these default settings, use the bar coded Setup Menu and scan the following bar codes in this sequence:

•START SETUP

•RESET

•END SETUP

2-1