InputScanner

 

Parameters:

line, position, prompt, allowbreakout, timestamped

Function:

This instructs the ActiveTerminal to display the

 

prompt at line and position and wait for data to be

 

entered from the terminal scanner only. Setting

 

allowbreakout to true allow user to "breakout" of

 

scanner only mode by pressing the end key on the

 

terminal. A termID+CR will be sent to the host.

InputYesNo

 

Parameters:

line, position, prompt

Function:

This instructs the ActiveTerminal to display the

 

prompt at line and position and wait for a Yes

 

(Enter key or C key) or a No (0 key or B key) from

 

the terminal keypad.

 

Note: C and B keys are used to facilitate keypad

 

entry while scanning with the integrated laser.

InputPassword

 

Parameters:

line, position, prompt, shifted

Function:

This instructs the ActiveTerminal to display the

 

prompt at line and position and wait for data to be

 

entered from the terminal keypad only. The entered

 

data is not displayed on the terminal.

InputSerial

 

Parameters:

line, position, prompt

Function:

This instructs the ActiveTerminal to display the

 

prompt at line and position and wait for data to be

 

received through the terminal serial port. Waiting for

 

serial input can be bypassed by pressing the enter key

 

on the terminal which will send an empty data string

 

to the host (fires the OnTermData event handler).

InputMagStripe

 

Parameters:

data

Function:

This command is for a printer initialization and

 

magstripe input on the Zebra Cameo printer

 

equipped with the magstripe option.

 

This instructs the ActiveTerminal to send the string

 

data to an attached Cameo printer with the

 

magstripe option and wait for data to be received

 

through the terminal serial port. Waiting for serial

 

6-10

Page 46 Page 48
Page 47
Image 47
Worth Data 802 RF user manual Entry while scanning with the integrated laser, Line, position, prompt, shifted, Data
Page 46 Page 48
Top Page Image Contents