Chapter 3

Operational Theory

Before you jump in and start writing a complex host program, it might be nice to be familiar with the theory behind the operation of your RF Terminal.

Basic RF System communications…

A WIFI RF Terminal system consists of three components – Host Server, Access Points and RF Terminal. The Access Points are connected to the Host Server by Ethernet wiring. The RF Terminal "signs in" by establishing

communication with a Server Program (located on the Host Server) through an Access Point. After the RF Terminal "signs in", the Server Program can send a

prompt to the terminal with the ActiveX program interface provided by Worth Data. The application running on the Host Server sends a data prompt to the RF Terminal device to the Access Point (using the Ethernet wiring), and then by radio link to the terminal device. The RF Terminal displays the data prompt on the display and waits for the operator to enter the requested data. Once the operator enters his data, the RF Terminal transmits the data to the Access Point, which in turn passes it on to the Host Server. The application on the Host Server processes the information and sends a new data prompt out to the Access Point and the whole process begins again.

A little more in depth…

This RF system’s dialogue is Terminal initiated. The Terminal says, “I’m here, give me something to do.

When you select DEVICE SIGN ON?, the RF Terminal first establishes communication with the network as follows:

1.It looks for an Access Point with an identical SSID and WEP Key using the Channel Number in its configuration as the starting channel.

2.If the terminal is configured to obtain its IP address from a DHCP Server, it requests an IP address from a DHCP Server. If it requests an IP address, the terminal will display:

Looking for DHCP Server,

Please Wait

3.If the terminal does not have a fixed Server IP address configured, it does a search for an Application Server. While is searches for an Application Server, the terminal will display:

Looking for App Server,

Please Wait

4.Now the RF Terminal sends a SIGN ON message to the application Server. All messages include data as well as the transmitter's and receiver's MAC address, IP address, and Port address.

3-1

Page 28
Image 28
Worth Data 802 RF user manual Operational Theory, Basic RF System communications…, Little more in depth…