Worth Data 802 RF user manual Accumulate Mode, Start/Stop Character only, Clear Enter

Accumulate Mode

Accumulate Mode is an option allowing the RF Terminal to accumulate multiple bar codes in its buffer, then transmit them to the computer as if they had been a single bar code. This is useful for entering quantities and other variable data.

Accumulate Mode works with Code 39, Code 93 and Code 128 only

and can't be used with a check digit. When the RF Terminal reads a bar code with a space as the first character, it beeps and buffers the data

without transmission. It continues to read and buffer bar codes (up to 40 characters) until it reads a bar code without a leading space. Once

it reads this last bar code, the entire buffer (including that last code) is

transmitted as one long bar code. A “double-minus” sign (--) bar code clears the buffer. The ENTER code on this Barpad is a Code 39

Start/Stop Character only.

Accumulate Mode must be turned on using the bar coded Setup Menu or by using the keypad. Accumulate Mode is located in the Code 39 parameters. Choose 4 to Enable or 5 to Disable this feature.

This numeric Code 39 "Barpad" illustrates ACCUMULATE Mode. Scan 5, 3, 8, and Enter. The RF Terminal transmits a single message of “538”.

0 1 2

3 4 5

6 7 8

9 Clear Enter

C-4