Worth Data 802 RF user manual Terminal Firmware Upgrades, Firmware Download via Radio Link

Appendix B

Firmware Upgrades

Occasionally it is necessary to get firmware fixes for problems discovered with the R/F Terminal System.

R/F Terminal Firmware Upgrades

The R/F Terminal firmware can be upgraded by downloading new firmware into the R/F Terminal from your computer over the radio link or using the serial port of the RF Terminal connected to your computer using the 802 Firmware Loader Utility.

You can always get the latest RF Terminal firmware from our website at the address: http://www.barcodehq.com/download.html

Firmware Download via Radio Link

The RF Terminal's firmware can be updated using the radio link only, (no need to connect to the serial port of computer and terminal). This firmware download can take place while other terminals are in normal operation.

The WD802Term ActiveX component must be running either within your application program or you can run the 802 Test Program.

The firmware version to which you intend upgrade needs to be in a folder named "802 Firmware" on the root directory of your "c:" hard drive. (If you don't have a c: drive, map another drive to it using Windows Explorer).

At the mode menu which shows:
DEVICE SIGN ON	------>1
SETUP MODE------------	>2
SITE SURVEY------------	>3

Press the F1 key and release it.

Press the Shift Key and release it.

Press the D key and release it.

You will now see the following screen displayed:

L-Serial Firmware Update

W-WiFi Firmware Update

K-Reset EEPROM

I-R/Clone J-T/Clone

B-1