Voice Message Partitions
Other
This parameter partitions the total amount of voice messages into different message lengths. The default setting is:
303015
xx yy zz
where: xx is number of ½ second messages
yyis the number of
zzis the number of
The total time allotted must not exceed 75 seconds. To change the partitions, scan or enter 6 digits total; 2 for the number of
default setting as an example.
WARNING: changing the Voice Message Partitions parameter after you have recorded messages could result in having to
Shut Down Time
Other
By default, if the RF Terminal is inactive (no keystrokes or scanning) for more than 5 minutes, it will shut itself down in order to conserve batteries.
This includes SIGNING OFF if appropriate. To resume operation, you must turn the RF Terminal back on using the ON/OFF key. To change the amount of time the RF Terminal waits before shutting down:
•Scan Shut Down Time
•Scan two digits - the default is 05 (5 minutes)- to correspond to the length of time in minutes. For example, 01 would be 1 minute.
If you want to prevent the RF Terminal from shutting off automatically at all, set the Shut Down Time to 00.
Laser Scanner Options
Other
None | 0 |
Double Decode | 1 |
4.5 second laser beam | 3 |
Transmit | C |
Transmit | D |
Transmit | E |
Transmit | F |
•By default, the RF Terminal has no special laser options set. If any of
the features below seem to fit your situation, set them appropriately. Settings C through F are not
