Advantek Networks AWN-MIMO-54RA user manual QoS, Click WMM Enable Click Apply

through the CCX-compliant clients on the non-serving channels when this parameter is enabled.

Limit xxx milliseconds (0-2000):It limits the channel measurement time. The default value is 250 milliseconds.

3.6 QoS

The QoS Page of RaConfig. It involves “WMM Enable”, “WMM – Power Save Enable” and DLS setup.

3.6.1 Configure to enable Wi-Fi Multi-Media

If you want to use “WMM – Power Save” or “Direct Link”, you must enable WMM. The setting method of enabling WMM indicates as follows:

Step1: Click “WMM Enable”

Step2: Click “Apply”.

33