Operating and Progr am ming
Installation
1-11
Installation
This section describes the additions, changes, and deletions to the
information that appears in chapter 7 of the 5071A Operating and
Programming manual.
CHAPTER GUIDE
Chapter Summary
In the bulleted list delete:
• Internal Battery Maintenance 7-11
Where to Find Important Topics
In the bulleted list delete:
• Disconnecting the Internal Battery 7-13
• Removing and Replacing the Internal Battery 7-13
• Using the Battery Disconnect Switch 7-12
Preparation for Use
Power Requirements
2nd paragraph, 1st and 2nd sentences are changed:
Operating power may also be s upplied as external dc voltages
between 40 and 58 Vdc. Maximum dc-power cons umption is 100 W.
Bench Operation
1st WARNING sentence is changed-
The 5071A weighs 28 kg ( 61 lbs ) .
Operating the 5071A From External Dc Power
1st paragraph, 1st sentence is :
In addition to ac power capability, the 5071A can also operate from
an external dc source with a voltage range of ± 40 to 58 Vdc.
Note content following the first paragraph is changed:
The 5071A runs from dc power when both ac and dc power are
available. The 5071A will not run from ac power unless the dc power
source fails or is disconnected.
Option 048:
Option 048:
Option 048:
Option 048:
Option 048:
Option 048: